Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Underbody sheetmetal needs replacement. How? 200 1985

posted by  ericbh1 on  Sat Feb 26 09:01 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Whoops. Jumped the gun there.

So the undeerbody sheetmetal on my car is coming off like gangbusters. Big chunks, like 8" X 14". Is is possible to remove the whole sheet and reattach a new one without draining the fuel line and removing all of the suspension and so on? Both rocker panels need replacing too. It looks to me like the rust started at their pinch weld and then move up and across. The floorpan which the rugs are attached to looks marvelous from below, and feels solid from above, so I think that part of the car is still useable.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Underbody sheetmetal needs replacement. How? [200][1985]
posted by  ericbh1  on Sat Feb 26 09:01 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.