Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2013 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rod Bolts and Pistons, B20 1800

posted by  jaydee on  Sat Mar 12 17:06 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

Two questions.

Are any listers aware of where in Canada I may purchase a set of rod bolts for my B20, other than at Volvo? The outfit in Prince George that is rebuilding my engine asked me if I could find a set.

Also, I will be putting new piston and rings in the old girl. The block has had a previous rebore of .030 over, and needs to be redone. The rebuilder has a set of Mahle .060 over and a set of Chev .060 over, miles apart in price. Two local Volvo hotrodders have strongly endorsed the use of the Chev sets, having had very good experience with that choice in their own engines. I am however not clear as to what advantage, other than price, that the Chev sets present. Do any listers have experience in this matter that they might care to share?
Thanks
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rod Bolts and Pistons, B20 [1800]
posted by  jaydee subscriber  on Sat Mar 12 17:06 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.