Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

HELP PLEASE CRANKSHAFT SPROCKET/GEAR

posted by  DMax on  Sat Mar 19 12:15 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

HELP PLEASE

Will a crankshaft sprocket/gear off a 240 or other Volvo work on my 87 740 if so what ones. Mine has 19 teeth and the locating pin is aligned with one tooth, it is 20.67 mm or .812” thick, 36.00 mm or 1.416” Inside Dia., 56.26 mm or 2.215” Outside Dia. Yes I do need one. I have put on cam & crank seals, timing belt tension bearing, water pump, valve cover gasket, 1 AC adjuster, radiator, electric fan, AC thermo switch, all belts and hoses and that was this week. I thought sure I had the damper pulley all the way on but well I am glad that the pin is meant to shear. At any rate I need a sprocket or gear as described.
Hep me!! Hep me!! Hep me!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HELP PLEASE CRANKSHAFT SPROCKET/GEAR
posted by  DMax  on Sat Mar 19 12:15 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.