Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

P/S Pump Fix and System Flushing 700 1990

posted by  Chris Mullet on  Tue Mar 22 03:38 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:08 CST 2014
[RELATED]

Thanks George, Steve, and Greg for yesterday's info on the P/S pump.

I took another look at it last night. The tensioner bolt is OK, the belt is still snug, and the pump is still turning without any appearant belt slippage. But if I tug at it hard, I can rock the pump slightly. With the belly pan in place, I can't see up at the bottom side of the the pump, but my guess is either that the pivot bolt is broken or the bracket is cracked or the bolt hole is beat out. I'll check it out on my day off when I've got time to chase parts and put it all back together in the same day.

New question - does anyone care to guess at how much fluid it might take to flush the P/S system? On a 15 year old car with all of the original seals and components, what type fluid should I use? Dexron III?

Thanks again.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New P/S Pump Fix and System Flushing [700][1990]
posted by  Chris Mullet subscriber  on Tue Mar 22 03:38 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.