Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AMM & Sealant/Hole? 700 1989

uid 30890's pic
posted by  dnvolvo on  Fri Mar 25 14:57 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jun 16 03:19 CST 2010
[RELATED]

On the AMM (007) and I noticed also on 020 (different car) there appears to be an area where sealant? is placed (by manufacturer) into what appears to be a small hole -- about 5mm in diameter or so. This is specifically located on the face of the black plastic piece(above the 007 stamp) which has the electrical connector on the front of it. It appears that on the 007 AMM the sealant has aged and may have some pin holes in it.

Anyone familiar with what the purpose is of this sealant? Is there a hole, screw, or something beneath?

Thanks!

--
dnvolvo '89 765T - '91 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM & Sealant/Hole? [700][1989]
posted by  dnvolvo  on Fri Mar 25 14:57 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.