Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cruise Contron install 700 1991

posted by  kerry on  Sat Mar 26 11:41 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 11 08:15 CST 2014
[RELATED]

just a couple of quick questions regarding the install of cruise on a 91 745T...

Control module: The FAQ list the location, but the description of the unit might be wrong for a late model car... I would like to know if the late model control unit has more than 8 wires, if the 2nd connector is a single yellow wire with an insulated female bullet connector on it, and if possible, the maker and part #'s on the unit if anyone has one easily at hand.

Everything else was as described in the FAQ's with only minor differences. It's all bolted up and waiting for the interior to dry out so I can re-install everything after a good cleaning.

Thanks-

By the way, the vacuum pump connector is a bitch to find even knowing where it's at!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise Contron install [700][1991]
posted by  kerry  on Sat Mar 26 11:41 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.