Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbo Crankcase Ventilation Question 1981 GLT 200

posted by  DougC on  Sun Mar 27 15:31 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

I'm cleaning the crankcase ventilation system on an 81 Turbo. It's our first Turbo so I'm just getting familiar with it. Connected to the breather box nipple is a two-inch long hose, then a small plastic piece similar to a flame trap housing, minus the flame trap itself. The large hose off the top of this plastic piece goes over the valve cover to the hardpipe that comes from the air sensor. The much smaller nipple of the plastic piece was capped. Should this smaller nipple be capped, or should it have hose leading to a vacuum source?
--
Thanks everyone for all the help, Doug C. 81 242 Brick Off Blocks, turbo bars and wheels, M46; 86 244, B230, 150k , auto.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Crankcase Ventilation Question 1981 GLT [200]
posted by  DougC  on Sun Mar 27 15:31 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.