Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Will BMW seats work in my 240? 200

posted by  swedesteed on  Mon Mar 28 05:24 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Mar 27 16:37 CST 2012
[RELATED]

I need to replace the driver's seat in my '88 244. (The lumbar support and side-bolster foam are shot, and replacing it is cheaper and easier for me than fixing it.) I've had no luck in finding a replacement from a 240 without having to buy an entire parts car, which I can't do for practical and financial reasons.

I've found a guy selling a pair of great seats from an E36 (late-1980s) BMW. But he's told me the distance between the seat-rail bolts is different; in the BMW, the distance betweeen the left bolt and right bolt is 18 inches, and between front and rear bolt is 15 inches. I measured on my brick, and side to side between bolts is 15 inches. (Haven't checked the fore-aft yet.)

Is there a way I could get this to work? How hard is it to drill new bolt-holes in the floor pan and plug the old ones? If I can get just one side to line up, could I bolt those in and skip the other side?

Thanks very much for any advice!
--
John--1988 244DL, 107K miles, M47, IPD sport exhaust--'Hilda'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Will BMW seats work in my 240? [200]
posted by  swedesteed  on Mon Mar 28 05:24 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.