Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

760GLE B280F Hoses & Pipes 700 1987

posted by  rollei35guy on  Sat Apr 2 11:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 15 19:22 CST 2012
[RELATED]

I'm in the midst of replacing all of the hoses, seals etc on my 87 760GLE. I had planned on making a pre-emptive strike at the heater core but a leak in the vicinity of the water pump has changed all that.

Anyway while replacing the waterpump, and myriad of hoses attaching it, I have found that a metal supply (or return) pipe that is unsecured. This is the one running from the water pump, under the intake manifold and back to the heater and (I presume) the oil cooler. There is a tab that has been bent back and it looks like it should attach to a bolt nearby (the 'y-pipe' that is also under the manifold. I think i can re-attach this thing but am wondering if there is another place it is secured. I don't really want to be driving around with this thing flopping around.

Carter
(Driving his '71 145 wagon until the newer of his old volvos is road worthy again)
--
Carter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 760GLE B280F Hoses & Pipes [700][1987]
posted by  rollei35guy  on Sat Apr 2 11:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.