Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Another problem with the reverse detent sleeve. 200 1983

posted by  Mr brick driver on  Tue Apr 5 16:34 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jun 26 04:12 CST 2014
[RELATED]

I have a 83 244 turbo with a m46. I'm haveing a hard time replacing my reverse detent sleeve. I had it all put back togeather with the over drive wire inplace and find that pulling up on the reverse pull on the gear shift lever becomes difficult. It fine with out the wire in place, but when ever I put it on with the wire as it should it is way to stiff to pull off. Any ideas here before I loose my sanity with this 15 minute job that has taken me five hours so far.
--
1988 244 DL + Virgos, and Power Windows, 1983 244 Turbo +Intercooler






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Another problem with the reverse detent sleeve. [200][1983]
posted by  Mr brick driver  on Tue Apr 5 16:34 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.