Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2012 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need a little advice on B30 140-160 1975

posted by  KlausC on  Thu Apr 7 07:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

My intake/exhaust header needs replaceing, along with a lot of other things. My plan was to remove the 12 nuts (did that) from the intake, remove it, and then put lots of PBBlaster on the 12 exhaust nuts. The problem is trying to remove the intake, it is stuck on. I tried shaking it up and down, but that only moves the whole car up and down! What is the secret? Will the exhaust just give me more problems?
I intended to remove the exahust header just enough to get the old gasket out and put the new one back in.
Why couldn't the engineers put the input on one side and the exhaust on the other?

Thanks,

Klaus
--
98 V70Rawd(101Kmi), 95 854T(85K mi), 75 164E(173K mi)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need a little advice on B30 [140-160][1975]
posted by  KlausC subscriber  on Thu Apr 7 07:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.