Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Please verify IAC test results 900 1993

posted by  someone claiming to be ron from Detroit on  Tue Apr 12 14:04 CST 2005 [RELATED]

Please help verify if my IAC valve is functioning properly.
Bench test: Pins 1 to 2 and pins 2 to 3 measure 13 ohms.
At rest, the valve is open approximately 1/8 or an inch.

Voltage applied to pins 1 and 2 (I think) the valve travels the 1/8 inch to close all the way.

Voltage applied to pins 2 and 3, the valve swings a half inch or so to fully open position.

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Please verify IAC test results [900][1993]
posted by  someone claiming to be ron from Detroit  on Tue Apr 12 14:04 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.