Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Thermostat & Oil Filter Adapter Housing Nut Sizes 700 1989

posted by  Colin_D on  Fri Apr 15 08:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Does any body know thw precise size either in metric or sae, inches?
of the large filter adapter bolt? and the thermostat oil cooler fixing nut?

Faq says about 32mm for the bolt and a deep 29mm 0r 1-1/16 inf for the nut holding the thermostat? Is that by practice what works?

Only I don,t want to go a buy the wrong size for the job as the local store may not want to change them if used.

Any body whose done the job and used the right sized sockets may be able to help me?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.