Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1981 244DL, B21A Valve Stem Seals and Cushions Question 200 1981

posted by  RLC on  Tue Apr 19 01:32 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello All

Anyone replaced the Valve Stem Seals and Cushions, without removing the Head?
If so, how?

Bolt Torques, etc.

It was suggested to pressurize the Cylinder, but that should force it to Bottom Dead Center.

It was suggested using the rope trick so the valves will not fall into the Cylinder, but how does one remove them to get to the Seals?

Any advice, would be appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1981 244DL, B21A Valve Stem Seals and Cushions Question [200][1981]
posted by  RLC  on Tue Apr 19 01:32 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.