Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240DL AUTO TRANSMISSION fluid inlet

posted by  alps on  Tue Apr 19 09:02 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I thought I was finished but alas I discovered a leak at the meeting of the feeder tube and the pan of the automatic transmission. It's not leaking at the fitting, but at the joint on the pan. I tried using epoxy glue, but it didn't work. I can drop the pan and braze it or go to pick and pull and replace it.
Any thoughts on the two options, or maybe a better means of fixing it? Thanks for your assistance. Alps in California.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240DL AUTO TRANSMISSION fluid inlet
posted by  alps  on Tue Apr 19 09:02 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.