Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ac conversion / service ports 200 1988

posted by  Fiver on  Tue Apr 26 09:40 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am converting my 88 245DL. I ordered the Volvo kit as well as a new compressor (Seltec 8251069R12) from fcpgroton.

The reason I got that compressor is because it has service ports on it; the Seltec R-134a compressor that fcpgroton stocks does not have service ports. So I need to drain/replace the oil and convert the ports.

The problem I am having is that the port adapters I got at the auto parts store are threaded differently on the high and low side, while on the compressor the high and low ports are both threaded the same -- thread size for both ports is the same size as my low side adapter and the high side adapter is too small to thread on.

Does anyone know what adapter I need to get for the high side that will work?

Thanks.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ac conversion / service ports [200][1988]
posted by  Fiver  on Tue Apr 26 09:40 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.