Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

140 vacuum controls for heat and ventilation 140-160 1973

posted by  JohnH on  Tue Apr 26 18:50 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 00:29 CST 2014
[RELATED]

Hi,
I'm replacing the non-functional fan on my 142. No probs other than the time - I followed the destructive method as described for the 240 and it all seemed to go well. My parts car 1974 144 fan worked and fitted

BUT... I tested the vacuum controls with my Mitivac and most of them held vacuum to a reasonable extent, but the heater control was just hopeless. Leaked like a sieve and just wouldn't hold vacuum. Is this fixable or am I in for a visit to Volvo Cental for a new part? Is it possible to retrofit the later model cable controled valve? Looked a bit major to me, but I'd be happy to be proven wrong.

All help gratefully received, as always

JohnH






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 140 vacuum controls for heat and ventilation [140-160][1973]
posted by  JohnH  on Tue Apr 26 18:50 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.