Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Setting the AMM ???????/LH.2.2 200 1988

posted by  rsjones on  Sat Apr 30 12:39 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Apr 3 17:15 CST 2014
[RELATED]

I just made the AMM tester that is shown in the FAQ's.I put the the tester in the blue connector that has the pink wire.I hooked everything right as I thought.The O2 is switching back and forward as it is suppose to.I checked the OHM reading on the AMM pins 2&6 this checked out at 300 OHM's.The led light doesn't switch off and on as I thought it would.I switched out 3 AMM still no luck.When the engine is reved the led does go off.Am I doing something wrong.
Rodney






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Setting the AMM ???????/LH.2.2 [200][1988]
posted by  rsjones  on Sat Apr 30 12:39 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.