Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HID converstion wiring concept 900

posted by  940 4ever on  Mon May 2 16:15 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 21 11:04 CST 2010
[RELATED]

Can anyone tell me if my concept is right here? I bought an HID conversion kit from the ebay and I wanna do the following:
1. connect the power from the head light bulb socket to a 12v relay (with a NC and NO terminals.)
2. When I am at the DRL mode, I assume the supply voltage to the head light will be lower than 12V, I run the wire from my head light to the NO terminal then to my fog lights to power them.
3. When I am at the driving light mode, I assume the supply voltage to the head light will be at 12v or slightly higher so it triggers the relay and jump it to the NC terminal which then I will run a wire from there to power my HID kit.

In short I would like to wire the lighting system such that in day time I will be using fog lights as DRL and at night I will be using my new HID kit.

Is my concept right? Thank you for any advise! Brickboard had help me alot before, hope this time will get some great helpful feedback from all you expert.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HID converstion wiring concept [900]
posted by  940 4ever  on Mon May 2 16:15 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.