Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine head surface corrosion 900 1995

posted by  volvito on  Sun May 8 13:09 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 23 04:59 CST 2014
[RELATED]

The engine is a B230F. The head surface has a bad corrosion spot near the water pump. It seem that there is a hole for water in the block, no a hole in the head in that area. This has cause the corrotion in the head surface, There is a bout one millimeter of good surface to the nearest head bolt hole and about 2 millimeter to the inside of the head gasket ring edge for that cylinder. Should I resurface the head? Is there any product out there to fix this kind of problem?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine head surface corrosion [900][1995]
posted by  volvito  on Sun May 8 13:09 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.