Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vibration difficult to find 200 1990

posted by  Bill N. on  Thu May 12 09:10 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 16 14:09 CST 2014
[RELATED]

On my last post I mentioned that I had a vibration that was very difficult to locate especially after changing both motor mounts and the trannie mount,rear trannie seal, all 3 u-joints, support bearing and the rear pinion seal. I have new Bilsteins front and rear and then there's the tires. They are 205's and after going to the resident experts on vibration in my city-Milwaukee they think it will show when I exchange tire with my other 240 which I will be doing soon. If that works I will get them all rebalanced. By the way, the front and rear bushings are tight ---no slop there. Stay tuned for the final answer!!

Bill Nelson Hartford, WI






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vibration difficult to find [200][1990]
posted by  Bill N. subscriber  on Thu May 12 09:10 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.