Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

one rear brake will not bleed 200 1978

posted by  someone claiming to be dieter on  Mon May 16 07:05 CST 2005 [RELATED]


'78 245, girlings. i just replaced the front calipers, rotors, and pads. no sweat. got myself a motive products powerbleeder(tm), the offices and production warehouse for which happens to be a 10 minute bike ride. so i went to bleed the entire system, and found the first in the sequence, left rear, didn't yield any fluid. when i went to pump the brake pedal, it would reach the end of its travel, and what little resistance it offered would simply give out with a small fart, and no air was being pushed out the open bleeder valve. the rest of the sequence bled normally. i guess tomorrow i'm going to start disassembling the left rear brake system starting from the caliper. it looks like the LR regulating valve is rusted over.

what does this indicate to you all? any advice?

thanks,

der dieter





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New one rear brake will not bleed [200][1978]
posted by  someone claiming to be dieter  on Mon May 16 07:05 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.