Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

stuck oil filter removal 120-130

uid 17774's pic
posted by  Damian on  Wed May 25 15:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


So we got the rebuilt B20 roaring to life for the first time this past weekend. After a breaking in period, it was time to change the oil. The "mechanic" who rebuilt the thing screwed the oil filter on so tightly, that it's not budging, absolutely impossible to remove so far.

Anybody have any tips or tricks for removal? Already tried a bit of pounding on the oil filter wrench handle. If worse comes to worse the carb and manifold will have to come off, to allow a heavy duty wrench to get in there. I'm hoping for an easier way out, if possible.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New stuck oil filter removal [120-130]
posted by  Damian  on Wed May 25 15:07 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.