Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

forgot to hook up ECT - throw lambda code too? 900

posted by  Felix_the_Cat on  Thu Jun 2 01:09 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Aug 13 14:16 CST 2014
[RELATED]

ok so I'm a bonehead, and I forgot to hook up the engine coolant temp sensor under the #3 intake rail after replacing the head, gasket, etc. It was very hard to start at first, but ran well after. It threw fault codes for ect (#2, 123) and lambda too lean/rich at idle (#6, 224). Is it possible bothwere due to my bonehead move? How do I find out if it was too lean or too rich? I cleared the codes, but have to go to work, wifey will be driving today and we will see if it throws another CEL. Any comments are appreciated.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New forgot to hook up ECT - throw lambda code too? [900]
posted by  Felix_the_Cat subscriber  on Thu Jun 2 01:09 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.