Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AW71/1031 - non LSD Dissassembly 700 1986

posted by  someone claiming to be needtechhelp on  Thu Jun 2 03:51 CST 2005 [RELATED]

Hi Volvo people,

I am in a precarious situation with the Volvo.

It's a 86 740 Turbo wagon B230FT. -Garrett type

AW 71 AT with a 1031 axle (I think) with 3.73 gears in it.

I am trying to replace the outer dust covers at the ends of the axle shafts and I need to remove the axle shafts to replace them.

I have the pumpkin cover off and I am looking from the rear of the ar forward at the Ring gear. To the right (passenger side) as I look into the housing there is a ring that looks like a tone producer that is used for the speed sensor pickup as the axle rotates.


There are 2 "straps type" clamps that look to be holding in the inner axle bearings (one left one right).

so... my question is, after I pull the strap clamps off "How do I remove the axle shafts ? What holds them on ?

Thanks in advance.

Al





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AW71/1031 - non LSD Dissassembly [700][1986]
posted by  someone claiming to be needtechhelp  on Thu Jun 2 03:51 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.