Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil filter sandwich plate help 700

this is whats on my good engine
http://evilallianceracing.com/ipw-web/gallery/albums/album223/S_DSC01364.sized.jpg
the oil filter has a sandwich plate then goes right to the filter... makes it very hard to get the filter off as it sits right under the turbo and over the motormount and crossmember

this is the sandwich plate on my bad engine... note it is bolted to the oil filter location on the block then has a relocation bracket.../img]
http://evilallianceracing.com/ipw-web/gallery/albums/album204/S_DSC01201.sized.jpg
http://evilallianceracing.com/ipw-web/gallery/albums/album204/S_DSC01205.sized.jpg

the problem i have is i want to use the one from the bad engine... but it has a long though bolt though the adapter fitting the one on the good engine has the part the filter screws onto mounted in the block...

so my question is can that filter mounting screw thingi on the good engine be removed so i can use the though bolt from the bad engine along w/ the relocation sandwich plate with it or am i stuck with cursing my oil changes untill i buy a filter relocation kit?

thanks
mark






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil filter sandwich plate help [700]
posted by  donalson  on Fri Jun 3 08:16 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.