Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Diagnostic code troubleshooting... 200 1989

posted by  Chased410 on  Fri Jun 17 06:43 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 27 09:15 CST 2011
[RELATED]

I bought a 1989 240DL that was (and still is) blowing out black smoke after the engine reaches temp. I replaced the flame trap and cleaned the blockages. Next, I ran the engine codes. I went from 3 codes to 2 now. I am getting 1-1-3 and 2-3-2. I have checked the wires running to the oxygen sensor and found nothing. The only thing I have yet to try is replacing it. Is there anything else I may be overlooking? Are there any other interpritations to these codes? Thanks in advance for any help!
Charlie






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Diagnostic code troubleshooting... [200][1989]
posted by  Chased410  on Fri Jun 17 06:43 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.