Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

hood cable/latch mechanism 700 1988

Hi all -

When I pull on the hood release lever, only the furthest latch is released. The one closest to the lever (the one on the driver side)doesn't respond. With a lot of manipulation and force, the stuck latch releases.

After inspecting the cable/latch mechanism in my '88 740gle wagon, it makes sense that the furthest latch releases. I would pull a cable tied to a springy metal catch. The catch get's pulled the same way as the force of my pull and thus releases the latch.

The catch closes to the lever doesn't get pulled when i pull on the release lever. The metal catch has a loop where the cable goes through to get to the next latch, but i don't see how this latch would get pulled when I pull the release lever. Additionally, the catch seems to be set up to release in the opposite direction of the pull of the release lever.

I'm the second owner of this volvo. I'm not sure whether someone replaced the hood cable incorrectly. Very frustrating. Does anyone have a diagram to illustrate how the cable/latch mechanism work. Thank you for any assistance.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.