Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2010 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

960 Lower Control Arms - FYI 900

uid 11021's pic
posted by  dewfpo on  Thu Jun 23 07:59 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:34 CST 2014
[RELATED]

I finally broke down and purchased the complete arms (w/bushings already installed) from FCP Groton for our 98 S90. After seeing that so many folks here were using them and were satisfied; and, someone recently posted that they were Meyle or Mahle replacement parts from Germany. Add to that the low price... seems like a deal you can't pass up if you need to replace those rear lower control arm bushings on your 960/90 series.

Mine showed up today, one had a ScanTech/Sweden label, both said "Made in Taiwan". One arm had the rear bushing indexed properly, the other arm had the bushing index off by about 5-10 degrees, although I doubt will be a problem.

The bushing did had a metal sleeve around them and the P/N on the bushings were : VO 960, 9191537.

Just thought some of you would like to know.

You never know what you are going to get from FCP Groton unless you specifically ask for a particular manufacturer.

Those that got Mahle/Meyle parts got lucky.

DEWFPO
--
1998 S90 071,245 and 1995 964 154,100






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 960 Lower Control Arms - FYI [900]
posted by  dewfpo  on Thu Jun 23 07:59 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.