Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Noisy IPD Turbo Cam in 86 230FT

posted by  jaydee on  Sat Jul 16 18:54 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 23:45 CST 2014
[RELATED]

I installed a Turbo cam from IPD into my 86 740 last week. I shimmed the valves (cold) so they were .014 to .015 across the board. I also installed new hushers on each stem.
This cam has a substantially higher lift than the original one. Is it to be expected that there would be more valve clatter because of this? It sounds as though I did not set the valves at all.
TIA
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Noisy IPD Turbo Cam in 86 230FT
posted by  jaydee subscriber  on Sat Jul 16 18:54 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.