Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

stuck handbrake on 1989 240 DL SW 200 1989

posted by  someone claiming to be max in ottawa on  Mon Jul 25 03:31 CST 2005 [RELATED]

Hi all,
(please ignore my laymans language)
My handbrake has never worked too good to begin with, and the other day I parked on a hill and yanked it so hard that the piece of metal just above the latch that clicks was pushed over the top of the little teeth, so that I could not get it back down again.

I spent hours taking apart the centre console, undid both the screws that hold the cables in on each side, as well as playing with the bolt at the end of the handbrake lever (15 - 17mm). I got the handbrake unstuck, but now that whole thing doesn't work at all. I saw one post for an early 80's 240, but in it the bolt (15 - 17mm) is said to be facing forwards, when mine is facing the back.

Is there someone out there who can offer a primer on ajusting the handbrake on late 80's 240's?

Thanks in advance,
Max K.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New stuck handbrake on 1989 240 DL SW [200][1989]
posted by  someone claiming to be max in ottawa  on Mon Jul 25 03:31 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.