Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rear wheel drum studs 120-130 1966

posted by  bmwfreak on  Mon Aug 8 06:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am trying to remove the rear drum wheel studs and having no luck banging them with a small sledge, any suggestions? are longer studs readily available?

I am running Ford Ranger 6" x 15" alloy wheels (doe hoof pattern) and the right wheel tends to rub against the inside of the wheel under hard cornering

I am replacing the panhard rod with an adjustable rod so I can shift the axle slightly right to avoid the probelm, but I also want to run wheel spacers just in canse and need to change to longer studs as the wheel nuts only go on about half way as they are now

thanks for any help

Robert
Toronto, Canada
rabbie6@hotmail.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear wheel drum studs [120-130][1966]
posted by  bmwfreak  on Mon Aug 8 06:07 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.