Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

throttle adjustments 200 1989

Had to replace the computer and TSP on my 1989 2240DL, Jetronic 2.4. Surging then really high idle.
1. Throttle linkage - should it be adjusted to put no pressure on the throttle valve arm or some downward pressure?
2. TPS - How much movement of the throttle valve arm should there be before the "click"?
3. Sometimes when letting off the throttle the car has a fast idle, sometimes normal idle. Tried it with the throttle likage disconnected from the throttle valve arm, same results. Cleaned the throttle valve with spray. Should I remove it and clean/rebuild it? Might be bindking sometimes? Are there rebuild kits?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New throttle adjustments [200][1989]
posted by  JOHNVON  on Tue Aug 9 08:21 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.