Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C component question 200 1989

posted by  helimech on  Sat Aug 13 01:09 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Aug 7 14:11 CST 2013
[RELATED]

Trying to figure out what this component is. On my 1989 240, there is a "Tee" fitting on the "outlet" side of the receiver/drier. There is a black plastic thimble sized cover on the top of the Tee fitting. Unscrewing the black plastic cover reveals what looks like some type of "orifice" valve. The black plastic cover has a blue o-ring under it. I'm confused as to what this thing is. I just installed a new expansion valve which is located at the evaporator. I thought A/C systems used one or the other (orifice valve or expansion valve)but not both. Any A/C techs out there that can solve this?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C component question [200][1989]
posted by  helimech  on Sat Aug 13 01:09 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.