Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Add-on condenser fan 200

I'm planning on adding a fan in from on the condenser on my '82 245, and would appreciate any suggestions about the best way to wire it up. I plan to use a relay powered up by the compressor clutch circuit, and also thought I would try to wire it through the 4th gear switch or the OD circuit so that the fan would cut out once in 4th gear. Any ideas would be very much appreciated. Thanks again in advance for your help.
Steve.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Add-on condenser fan [200]
posted by  rusteebrick  on Wed Aug 24 11:52 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.