Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

FYI - Volvo fuses can be tricky. 200

posted by  someone claiming to be Manolo on  Mon Aug 29 17:58 CST 2005 [RELATED]

I give all my fuses a little rotation about once a year to clean the connection.

Recently, the blinker would buzz loudly when activated, then blink a few times, and then stop. Emergency flashers still worked.

Put in new blinker - still no turn lights.

Fuse #5 looked good, 12.5 V at both ends.

Removed fuse. One end of the metal contact had crumbled, exposing the plastic beneath. Only the edges of the crumbled metal were touching the fuse holder.

New fuse fixed problem.

This was the first fuse I had ever replaced. I'm thinking it's time to replace ALL the fuses in both bricks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New FYI - Volvo fuses can be tricky. [200]
posted by  someone claiming to be Manolo  on Mon Aug 29 17:58 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.