Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Suspension mounting bracket 200 1986

posted by  twoforty's on  Wed Apr 19 01:29 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 18 14:54 CST 2013
[RELATED]

pat,

Your talking about the bolt (fastener) that goes through the shock absorber, and lower control arm ? If so, it is a pass through long bolt with a sleave between the two sides of the lower control arm. If one side is loose...tighten it. If the other side is missing, replace it with a grade 8 (??) or better. Get one (2), don't forget the spacer, from any of the Volvo parts houses (FCP Groton...IPD....Swedish Engineering....etc.). Top shock bolt (stud) is a threaded stud into the chassis. If that's broken, there should be a hex flange at the base that you can put a socket on it to remove. Replacement would have to come from one of the above type parts suppliers.

Enjoy.
--
84, 242GLTi, 167K, 4+OD, still in rehab; 89, 245 DL, 323K, M 47, daily driver; 93, 245, auto, 167K ; and other toys.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Suspension mounting bracket [200][1986]
posted by  POB  on Tue Apr 18 04:54 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.