Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

OBD code 3-1-1 200 1991

posted by  Art Benstein on  Sat Mar 5 07:35 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

This could result if you have a cluster from an 88. Check the date on the instrument cluster; the seller may have done one on you. Or was this OK before you changed the light bulb?

If it is an old cluster, and you don't want to get the right one, you can pull the black/blue from the round plug pin 6 and wire it with a spade lug to the dual terminal where the cruise normally connects. The older clusters use that pin 6 for the alternator D+ feed to the AC delay relay.
--
Art Benstein near Baltimore

"Beer is proof that God loves us and wants us to be happy." - Benjamin Franklin






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OBD code 3-1-1 [200][1991]
posted by  Xraybob  on Sat Mar 5 07:19 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.