Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2014 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Diagram of the XR700 basic set up 120-130

posted by  walrus3 on  Wed Aug 1 21:18 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

The capacitor/condenser is required by the points. No points, no condenser.
If you are using the original coil in the firewall you don't need a ballast resistor.
If you install an aftermarket coil you have to determine whether IT wants a ballast
or not. Usually if they are over about 3 ohms resistance in the primary winding
you don't need a ballast but the data that came with the coil might tell you.
--
George Downs Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New points to electronic ignition conversion [120-130]
posted by  DBS  on Wed Aug 1 19:09 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.