Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

113 code, Did I cause? 900 1994

posted by  The Rod on  Wed Oct 10 11:27 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 12:15 CST 2014
[RELATED]

Thanks to both of you for the replies. I forgot to mention, I unplugged the AMM and it DID idle better. So I got a spare AMM from my 92 940 and swapped it in...same damn thing. Identical. I thought if you unplugged the AMM and the idle reverted to normal(limp home mode) it was dead nuts diagnosis for a bad AMM...apparently not. Also saw this post and it too seems to indicate that normally there would be an accompanying code for the 02 sensor?

http://www.brickboard.com/RWD/volvo/1333103/220/240/260/280/24091_check_enging_light_code_113_car_running_well.html

Hmmmmmm






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 113 code, Did I cause? [900][1994]
posted by  The Rod  on Wed Oct 10 09:46 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.