Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Arm Bushing Replacement 200

posted by  1990Volvo240 on  Thu Aug 29 20:55 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Hi,

A while back I bought new brackets from Tasca to press new Boge bushings in and I had to use my shop press. Same thing when I put new bushings in old brackets around the same time. They were tight.

I have read here on the BB that people have had trouble with the fit being too loose, some resorting to tack weld the bushing shell to the bracket.

Do you have any wiggle room for the bushing in the bracket?

Yes, most sites don't have a designated left/right side bushing. Don't worry about that. You can use what they sell on the sites for both sides.

Travis






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control Arm Bushing Replacement [200]
posted by  dobber13 subscriber  on Thu Aug 29 19:45 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.