Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Update 200 1988

posted by  1908242DLa on  Mon Jan 21 09:07 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 00:47 CST 2014
[RELATED]

Thanks, CB and Michael Yount.

I used a wire brush, but not brake cleaner, when the stud was installed.

Last night, I used brake cleaner and a wire brush to clean the stud's threads in question. It was shiny, like new. I then installed the lug nut. It snugged up perfectly. Was there some debris on the threads that prevented it from torquing up?

I might just replace the stud anyway. Would you explain how to get the old stud off and install the new stud?

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lug Nut Stud Won't Torque to Spec [200][1988]
posted by  1908242DLa  on Sun Jan 20 15:48 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.