Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front Upper Control Arm Bushings 140-160 1970

posted by  walrus3 on  Sun Dec 30 09:04 CST 2001
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

It is not normal. If it had been the lower A-frame bushings
I would have guessed that you have early A-frames and late bushings.
(The first few years used the same bushings as the 122/1800, which
are smaller) Since it is the upper bushings, I'm hard put to guess
unless you got the upper bushings in the lower A-frame and now
are trying to put bigger lower bushings in the upper A-frame.
Call up IPD tomorrow and talk to Cameron or Shayne (or maybe
Scott). Have the part numbers handy when you call.
Since you bought the bushings from IPD, you should count on them
to help you straighten this out, which I think they will gladly do,
based on my experience with them.
--
George Downs Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Upper Control Arm Bushings [140-160][1970]
posted by  someone claiming to be Thom  on Sun Dec 30 01:37 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.