Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Throttle Position Sensor Wiring 700 1989

posted by  Vroom on  Mon Jan 28 13:45 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

If it's the same as my 88 (from memory) the wire in the top of the connector gets 12 v from the switch and supplies the turbo+ at WOT. I think the middle wire (brown?) supplies 12 v to the switches. At closed throttle there should be 12 v at the bottom wire of the switch. There are acutally two switches one for WOT and one for CT
--
88 765 w/2stage boost & G-valve @ 14 psi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Throttle Position Sensor Wiring [700][1989]
posted by  someone claiming to be pal@speed-racer.com  on Mon Jan 28 11:52 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.