Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/1999 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

victory & question day 120-130 1965

posted by  122 and 940 and too many on  Tue May 28 10:48 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 13:12 CST 2011
[RELATED]

Congratulations.

One often unnoticed problem with clutches not releasing properly on an Amazon is wear on the fork of the clutch master cylinder. The hole where the cotter pin goes through and connects it to the pedal wears oval and you get a lot of lost motion. The clutches for 120, 140, and early 240 all superseded out to the same part, if you can get appropriate adjustment on the threaded bar you should get away with it.

As to your noise, have you checked the rubber cushions for the pins on the propshaft centre bearing?



Regards


Pete






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New victory & question day [120-130][1965]
posted by  SebCH  on Tue May 28 09:51 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.