Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heat/cold controller 200 1987

posted by  charm on  Fri Feb 7 03:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I bought mine at IPD for I think $50-, no shipping as live near them. It took me 3 hours to do this job. Te work is done while lying upside down under the drivers side. The time consuming part, and the reason there's a discrepency in project time here, is the hoses that attached to my old heater control valve didn't exactly want to come off. There's not a lot of room in there to use something to pry off the hose so you just have to keep trying and trying and trying, it was a real PITA on mine. Also, just wait unitl you don't have the cold option anymore, that's fun. Mine eventually went far enough to give me an infinite number of choices of interior temperature choices as long they were extremely hot. I wanted to try frying an egg on the passenger seat.
--
Portland, OR 1987 240 dl wagon (not so rusty anymore) 'rustbucket'






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heat/cold controller [200][1987]
posted by  MarcoPolo  on Thu Feb 6 12:59 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.