Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2013 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

running on two cylinders 140-160 1973

posted by  walrus3 on  Sun Mar 2 08:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

That is normally a symptom that one of 2 sets of points located in the lower
part of your distributor is not making good contact. They screw on with 2
screws (they're metric:DON'T lose them!!) on the side of the distributor
near the bottom of the big part. Take them out and clean them good,
make sure the wires where they plug in are making good contact, etc.
--
George Downs, The "original" Walrus3, Bartlesville, Oklahoma






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New running on two cylinders [140-160][1973]
posted by  someone claiming to be beanbag  on Sun Mar 2 06:50 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.