Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Which tools to get. 200

posted by  porkface on  Thu Feb 12 12:48 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:12 CST 2014
[RELATED]

i have had craftsman stuff for years, maybe 30. that's my only suggestion against, no line wrenches. easco and kd are made by the same outfit, danaher corp. danaher owns matco, but that stuff is made elsewhere.

a good set of wrenches is the flat or the fixed angle head gearwrenches. don't get the floppy heads, they always fold when you don't want them to. don't want gearwrenches, then, get a set of combinations that are 6 point in the closed end. better bite. have fun, chuck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Which tools to get. [200]
posted by  yama  on Thu Feb 12 11:30 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.