Thanks for the tip! I'm new to some of this stuff! The exhaust consists of an ipd header into 2.5" pipe with a resonater about halfway back, going into a "y"-pipe just in front of the diff, where it splits into two 2.25" pipes and into the mufflers, which are Magnaflows. I put it all together on a Saturday in the shop where I used to work(we had a pipe bender, this was my first experiment with it!). I quite the next weekend, and lost access to the bender!! That's why the mufflers still aren't quite lined up straight! The pipe going into the muffler on the driver's side is flexible tubing because I just couldn't get the angles right coming from the pipe off of the "y". It was a fun experience. The tone at idle is very deep, but gets way too loud when you're actually driving, different mufflers will be going on in the near future.