Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 countershaft spindle 1800

posted by  Phil S. on  Fri Apr 2 03:29 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

The large end goes to the rear. You should be able to push it almost all the way through from the rear -- then you need to drive it in the last 3/4" or so with a hammer and drift.

There are two different sizes of spindle, but they are so different it would be obvious if you had the wrong one.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M41 countershaft spindle [1800]
posted by  someone claiming to be amazoniac  on Thu Apr 1 19:32 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.